CoreXY up to 20000 mm/s² Acceleration
The Bambu Lab P1P inherits the proven kinematics and motion control system of the Bambu Lab Flagship printer. It prints with a top speed of 500 mm/s, the acceleration from zero to 500 mm/s takes just 0.025 seconds.
Vibration Compensation & Pressure Advance
The active vibration compensation (XY) algorithm and pressure advance guarantees extra smoothness and gets you good prints.
Direct-drive Extruder
With the design that the motor is directly connected to the extruder, P1P has better control on the extrusion and retraction of flexible filaments. Precise and consistent extrusion for smooth and no-blur prints.
Succeed with a Perfect First Layer
The automatic bed leveling(ABL) sensor calibrates and levels the bed properly, making you a perfect first layer for every 3D print.
Bambu Studio & Bambu Handy
Connect with Bambu slicing software and mobile app to control your printer and monitor the prints.
All-metal Hotend
Durable material made to support long-time 3D printing filaments including ABS, carbon fiber at high temperatures. It provides accurate and smooth extrusion to achieve quality printing performance.
Filament Run-out Sensor
Eliminate the problem of empty spools during printing. Change filament when empty and Resume.
Power Loss Recovery
Worry-free from a power cut-off, you can resume the print from where it left off.
Semi-automatic Belt Tensioning
The tension of the belt is essential for ensuring dimensional accuracy. Resonance frequency identification runs every time to help maintain the correct tension.
Fans with Speed Feedback
The speed feedback sensor monitors the fan's speed ensuring that the fan is able to operate at its optimal speed at all times.
Item | Specification | |
Printing Technology | Fused Deposition Modeling | |
Body | Build Volume(W×D×H) | 256*256*256 mm³ |
Chassis | Steel | |
Shell | Printable | |
Tool Head | Hot End | All-Metal |
Extruder Gears | Steel | |
Nozzle | Stainless Steel | |
Max Hot End Temperature | 300 ℃ | |
Nozzle Diameter (Included) | 0.4 mm | |
Nozzle Diameter (Optional) | 0.2 mm, 0.6 mm, 0.8 mm | |
Filament Cutter | Yes | |
Filament Diameter | 1.75 mm | |
Hot bed | Build Plate (Included) | Bambu Dual-Sided Textured PEI Plate |
Build Plate (Optional) | Bambu Cool Plate Bambu Engineering Plate Bambu High Temperature Plate | |
Max Build Plate Temperature | 100℃ | |
Speed | Max Speed of Tool Head | 500 mm/s |
Max Acceleration of Tool Head | 20 m/s² | |
Max Hot End Flow | 32 mm³/s @ABS(Model: 150*150mm single wall; Material: Bambu ABS; Temperature: 280℃) | |
Cooling | Part Cooling Fan | Closed Loop Control |
Hot End Fan | Closed Loop Control | |
Auxiliary Part Cooling Fan | Optional | |
Supported Filament | PLA, PETG, TPU, ASA, PVA, PET | Ideal |
PA, PC, ABS | Capable | |
Carbon/Glass Fiber Reinforced Polymer | Not Recommended | |
Sensors | Chamber Monitoring Camera | Low Rate Camera 1280 x 720 / 0.5fps (Optional) Timelapse Supported |
Filament Run Out Sensor | Yes | |
Filament Odometry | Optional with AMS | |
Power Loss Recover | Yes | |
Physical Dimensions | Dimensions(W×D×H) | 386*389*458 mm |
Net Weight | 9.65kg | |
Electrical Parameters | Input Voltage | 100-240 VAC, 50/60 Hz |
Max Power | 1000W@220V, 350W@110V | |
USB Output Power | 5V/1.5A | |
Electronics | Display | 2.7-inch 192x64 Screen |
Connectivity | Wi-Fi, Bluetooth, Bambu-Bus | |
Storage | Micro SD Card | |
Control Interface | Button, APP, PC Application | |
Motion Controller | Dual-Core Cortex M4 | |
Software | Slicer | Bambu Studio Support third party slicers which export standard G-code such as Superslicer, Prusaslicer and Cura, but certain advanced features may not be supported. |
Slicer Supported OS | MacOS, Windows |