Gigantic size
With its large build volume of 800mm x 800mm x 1000mm, this industrial FDM printer is perfect for printing large models. This means you no longer need to cut your models into small sections to print them properly, everything fits in one go.
High-quality craftsmanship
The machine has an integrated design, both elegant and solid. The X and Y axes use linear guides, which greatly improves stability during printing and increases the life of the equipment. The Z axis has been improved to make everything run even smoother, while ensuring precise leveling. Finally, for better stability, the machine rests on carbon steel supports with a non-slip rubber base.
Fast printing
With a powerful 64-bit quad-core processor clocked at 1.5GHz (RK3328 SOC), this 3D printer has all the power needed to operate at full speed. It can even reach an impressive printing speed of 300mm/s, although Elegoo recommends 150mm/s for best results. This is simply one of the fastest speeds for a printer of this size.
Auto-leveling
With its one-click auto-leveling system and ultra-precise non-contact sensor, the Elegoo OrangeStorm Giga automatically collects 121 data points on the platform (in 11 x 11). This way, you will have a perfect leveling, without any effort on your part.
Upgraded nozzle
The upgraded high-temperature nozzle can reach 300°C and has a dual-gear extrusion structure with a titanium alloy heating element. In addition, the nozzle is upgraded to chrome-zirconium copper with a 60W ceramic heating block for smoother and more uniform extrusion, which improves the printing accuracy.
With its PID auto-calibration feature, the nozzle controls the temperature precisely. A built-in acceleration sensor also automatically adjusts the parameters to compensate for resonances, ensuring optimal print quality and greatly improving your experience.
The 0.6 mm nozzle is included, while the 0.4 mm, 0.8 mm and 1 mm nozzles are sold separately.
Efficient heated bed
The heated bed consists of 4 independent magnetic PEI beds (410 x 410 mm), capable of reaching up to 90°C. They can all heat up at the same time and reach this temperature in 17 minutes, as long as the room is around 25°C.
The 3D printer can automatically detect where your model is and heat only that part. You can also manually manage each zone to save energy if necessary.
Powerful Cooling Fan
The cooling fans (2 x 5015 blower fans and 1 x 4010 axial fan) reinforced on both sides greatly improve the quality of your prints. They are also intelligent, automatically stopping when the print is finished. This saves energy, reduces noise, and extends their lifespan.
Filament Detection & Power Loss Recovery
To save you from stress if the print is interrupted, when the filament is broken or out of filament, the machine will sound an alarm and pause the print by itself. No matter if it is for a broken filament, a power outage, or even if you decide to pause, you can always resume the print easily.
Large Spool Holder
Made of high-quality sheet metal, this spool holder can easily handle filament spools up to 5 kg. With its compact yet sturdy design, it provides reliable and consistent support for your large prints from start to finish.
7-inch Portable HD Capacitive Screen
The 7-inch HD capacitive screen is very convenient, being able to be detached and used by hand. It supports model preview in the Elegoo Cura and allows you to choose from 8 different languages.
Printing Technology FDM
Voltage 100-120V/220-240V
File Transfer Method USB / LAN / Wi-Fi
File Format STL / OBJ
Supported Languages French / English / German / Russian / Italian / Spanish / Japanese / Chinese
Print Volume 800 x 800 x 1000 mm³
Print Bed Size 820 x 820 mm² (4 independent PEI beds of 410 x 410 mm²)
Machine Dimensions 1224 x 1164 x 1425 mm³
Carton Size Lower Axis and XY Axis Components: 1350 x 1215 x 420 mm³
Two Z Axis Components: 1350 x 1215 x 350 mm³
Maximum Machine Size in Operation 1224 x 1520 x 1570 mm
Maximum nozzle temperature 300 °C
Maximum heated bed temperature 100 °C (25 °C at room temperature)
Compatible filaments PLA / PETG / TPU / Nylon
Machine weight 104 kg
Carton weight 145 kg
Resume printing functionality Yes
Filament detection functionality Yes
Maximum print head speed 300 mm/s
Maximum print head acceleration 5000 mm/s²